Shifting; To Start Out And Accelerate - Yamaha Big Bear YFM400R Owner's Manual

EBU01295

Shifting

This model has a 5-speed forward and
1-speed reverse transmission with centrifugal
automatic clutch. The transmission allows you
to control the amount of power you have avail-
able at a given speed or for starting, acceler-
ating, climbing hills, etc. To shift into neutral,
return the throttle lever to the closed position
and repeatedly depress the shift pedal until it
stops. When it stops, it will be in reverse gear.
Raise the pedal slightly to neutral.
1. Shift pedal
R. Reverse position
N. Neutral position
CAUTION:
_
Do not coast for long periods with the en-
gine off, and do not tow the ATV a long dis-
tance. Even in the neutral position, the
transmission is only properly lubricated
when the engine is running. Inadequate lu-
brication may cause damage.
_
EBU00205

To start out and accelerate

1. Release the throttle lever.
CAUTION:
Always close the throttle while shifting
gears. Otherwise, damage to the engine
and drive train may result.
2. Shift into first gear and release the shift
pedal.
3. Open the throttle gradually.
6-5