Yamaha Big Bear YFM400R Owner's Manual page 117

1. O-ring
Tightening torques:
Drain bolt:
32 Nm (3.2 m·kgf, 23 ft·lbf)
Filter cover bolt:
10 Nm (1.0 m·kgf, 7.2 ft·lbf)
11. Add the specified amount of the recom-
mended engine oil, and then install the
engine oil filler cap.
2. Engine oil filter element
Recommended oil:
See page 10-2.
Oil quantity:
Periodic oil change:
2.9 L (2.6 Imp qt, 3.1 US qt)
With oil filter replacement:
3.0 L (2.6 Imp qt, 3.2 US qt)
Total amount:
3.5 L (3.1 Imp qt, 3.7 US qt)
CAUTION:
_
G In order to prevent clutch slippage
(since the engine oil also lubricates
the clutch), do not mix any chemical
additives. Do not use oils with a diesel
specification of "CD" or oils of a high-
er quality than specified. In addition,
do not use oils labeled "ENERGY
CONSERVING II" or higher.
Make sure that no foreign material en-
G
ters the crankcase.
_
8-8