Drive Chain Slack Adjustment - Yamaha Raptor YFM350RT Owner's Manual

EBU14990

Drive chain slack adjustment

1. Loosen the rear wheel hub upper and
lower bolts.
1. Upper wheel hub bolt
2. Loosen the locknuts on each side of the
swingarm. To tighten the drive chain, turn
the adjusting bolts in direction a. To
loosen the drive chain, turn the adjusting
bolts in direction b and push the wheels
forward. Turn each adjusting bolt exactly
the same amount to maintain correct axle
alignment.
2. Lower wheel hub bolt
NOTE:
_
There are alignment marks on each side of
the swingarm and on the hub. Use them to
check for proper wheel axle alignment.
_
1. Locknut
3. Alignment marks
3. After adjusting, tighten the locknuts and
the wheel hub bolts to the specified
torques.
8-30
2. Adjusting bolt