Alert Priority; Option Select Mode - Whistler 438Ru Owner's Manual

435ru-558ruman-wo_tat.qxp 1/30/2012
OPERATION

Alert Priority

When two or more signals are received at the same time, the
alert priority is:
1. Laser
2. Speed Radar
Example: If X band is alerting, then suddenly a laser signal is
detected, the laser warning will override the X band alert.

Option Select Mode

Press the Menu button to enter Option Select Mode. Press
the Menu button again will step thru in an ascending order
while pressing the City button will step thru in a decending
order.
Press the Power button to exit. Option mode will
automatically exit if no buttons are pressed within 20
seconds.
11:11 AM Page 23
20
OPERATION
Feature: Display Shows:
Change Tones TONE 3
Self Test TEST YES
Ka Band Ka - OFF
Laser Pulse Rate LSR LSID
Laser Segment 1 LSR 1 Y
Laser Segment 2 LSR 2 Y
Laser Segment 3 LSR 3 Y
Laser Segment 4 LSR 4 Y
Laser Segment c LSR c N
Laser Segment XR LSR XR N
Localized Text
RUS
(438Ru ONLY)
Localized Voice
L - RUS
(558Ru ONLY)
POP Mode POP N
Battery Saver Mode B SVR N
XK Filter Mode XK FLTR
Ka Filter Mode Ka FLTR
Alert Periscopes
LED BLNK
(default = Blinking with alert)
VG-2 Mode VG2 OFF
21
To Change:
D=Dark/Q=Quiet Options:
Tone 1, 2, 3
D or Q
(three di erent tone patterns)
D for ON Y = full audio tones
Q for OFF N = 1 beep
D for ON Ka ON
Q for OFF
Ka OFF (default)
Norm
D or Q
OFF
to select
LSID (default)
D for ON LSR 1 YES (default)
Q for OFF LSR 1 NO
D for ON LSR 2 YES (default)
Q for OFF
LSR 2 NO
D for ON LSR 3 YES (default)
Q for OFF LSR 3 NO
D for ON LSR 4 YES (default)
Q for OFF LSR 4 NO
D for ON LSR c YES
Q for OFF
LSR c NO (default)
D for ON LSR XR YES
Q for OFF LSR XR NO (default)
D or Q RUS = Russian
to select ENG = English
D or Q L - RUS = Russian
to select
L - UKR = Ukrainian
L - KAT = Kazakhstan
L - TAT = Tatarian (coming)
L - ENG = English
L - OFF = None
D for ON POP = ON
Q for OFF
POP = OFF (default)
D for ON Battery Saver = ON
Q for OFF
Battery Saver = OFF (default)
D or Q Filter 1 (default)
to select Filter 2
D or Q Filter 1 (default)
to select Filter 2
D or Q ON, OFF,
to select BLINKING
D for ON VG2 = ON
Q for OFF
VG2 = OFF (default)