Operation; Power On And Self-Test; Memory/Beep Confirmation - Whistler PRO-68XRi Owner's Manual

OPERATION

Power On and Self-Test

To turn the unit ON or OFF, gently press the center of the
into
Power/Volume button the side of the unit.
Each time your Whistler detector is turned on, an automatic
self-test sequence confirms that the speaker, visual displays
are functional along with many of the saved settings.

Memory/Beep Confirmation

All features selected (except Stay Alert and Quiet) are
retained in memory. Each time a button is pressed one beep
confirms feature "on", two beeps confirm feature "off".
Audio Level Adjustment
To change the audio level:
• Move Power/Volume button back to increase audio
level.
• Move Power/Volume button forward to decrease
audio level.
As audio level is adjusted, beeps are provided and the
display indicates volume level.
Self-Test Mute
Simply press the Quiet button during the self-test
sequence to cancel the self-test audio. This will not affect
radar/laser alerts. To restore the self-test audio, simply
press the Quiet button during the next self-test.
10
OPERATION
Auto Quiet Mode
Auto Quiet mode reduces the selected audio level
approximately 5 seconds after a radar or safety radar signal
is detected. The alert for any new signal within 20 seconds
will resume at the lower level. Auto Quiet mode does not
affect laser alerts.
• Press Quiet (before a signal is detected) to engage
Auto Quiet mode.
• Once the Auto Quiet mode is engaged, you may
cancel the audio alarm by pressing Quiet.
• Press Quiet (when the unit is not alarming) to cancel
Auto Quiet mode.
Quiet Mode
Quiet mode cancels audio during an alert and any new alert
within 20 seconds. After 20 seconds of no radar signal
detected, the audio alerts are restored.
• Press Quiet to cancel the audio.
• Press Quiet a second time during an alert to restore
the standard audio alert pattern.
11