Canon Color imageRUNNER LBP5975 Getting Started Manual page 65

Align the notch (B) with the RAM slot as shown in the figure
the RAM module completely into the slot
a
b
When the RAM module is installed properly, it is locked by the levers (B) on both
sides of the RAM slot.
● Installing ROM
Open up the lever of the ROM slot.
Insert the ROM module into the slot guides so that its notch (A) is at the opposite
side of the lever (B), and then press the ROM module completely into the slot.
(B)
Step
8
(C)
When the ROM module is installed properly, the projection of the lever is caught in
the notch (C) of the ROM.
64
a
, and then insert
b
.
(A)
CAUTION
Be careful not to be injured by the edges of the main board parts or
the RAM/ROM modules.
7
Attach the slot cover a, then close it b.
a
b
8
Secure the slot cover using the six screws.