Removing The Packing Materials - Canon Color imageRUNNER LBP5975 Getting Started Manual

Be sure to install the printer on a sturdy platform that can easily
support the weight of the printer and optional accessories. Do not
install the printer in unstable locations, such as unsteady platforms
or inclined floors, in locations subject to excessive vibrations, or on
the upper row of a computer rack, as this may cause the printer to fall
or tip over, resulting in personal injury.
IMPORTANT
Secure sufficient space around the printer at the installation site so that
you can install the optional accessories and connect cables.

Removing the Packing Materials

This printer is provided with tape and packing materials to be protected from
excessive vibrations and shocks during delivery. Remove the tape and packing
materials after the printer is carried to the installation site.
IMPORTANT
•
If there is any packing material remaining inside the printer, this may result
in poor print quality or damage to the printer when operating the printer. Be
sure to remove all the packing materials following the procedure.
•
The removed packing materials are required when transporting the printer
for relocation or maintenance. Keep them where they will not get lost.
NOTE
The packing materials may be changed in form or position to be placed, or
may be added or removed without notice.
1
Remove the tape attached to the printer. You will remove the
tape (A) later.
•
LBP5975 (7 locations)
(A)
b
a
15
Step
1