Amana 1800 W - 2005 Manual page 33

Quick Start Reference Guide
Refer to Product Safety Manual for Safety Statements
DO NOT power spray
No metal pans
Numbered Pads
1
End of Cycle Beep
2
Speaker Volume
3
Key Beep
4
Keyboard Enable
Window
5
Add Time During
Heating
6
Reset Door Open
7
(some models)
Maximum Heating Time
8
Manual Operation
9
(some models)
Double Digit Operation
0
Clean Filter Message
Part No.12804405
Revised 10/04
©2006 Maytag Services
Complete Owner's Manual available online
Can I change an option?
?
Options such as single or double pad programming, beep volume, and
maximum cooking time can be changed to suit individual preferences.
To change options:
1. Open oven door.
• If door is closed or RESET pad is pressed before programming is complete,
changes are discarded and microwave exits programming mode.
2. Press and hold pad 2 for approximately 5 seconds.
• This begins options mode.
• Microwave will beep and
3. Press number pad that controls option to be changed.
• See table below for options.
• Current option will display.
4. Press number pad again to change the option.
• Each time pad is pressed, option will change.
• Match code displayed with code for desired option.
5. Press START pad to save changes.
• To change additional options, repeat steps 3 and 4.
• Changes appear after door is closed or STOP/RESET pad is pressed.
Display Options (Factory Settings in Bold)
OP:10 3 second beep.
OP:11 Continuous beep until door is opened.
OP:12 5 beep bursts until door is opened.
OP:20 Eliminates beep.
OP:21 Sets volume to low.
OP:22 Sets volume to medium.
OP:23 Sets volume to high.
OP:30 Prevents beep when pad is pressed.
OP:31 Allows beep when pad is pressed.
OP:40 15 seconds after oven door is opened, keyboard disabled.
OP:41 30 seconds after oven door is opened, keyboard disabled.
OP:42 1 minute after oven door is opened, keyboard disabled.
OP:43 2 minutes after oven door is opened, keyboard disabled.
OP:50 Prevents adding heating time while oven is heating.
OP:51 Allows heating time to be changed while oven is heating when a memory pad
is pressed.
OP:60 Allows oven to resume heating time countdown after door is opened during
cycle.
OP:61 Cancels heating time count down after door is opened during cycle.
OP:70 Allows 60 minutes of heating time (some models).
OP:71 Allows 10 minutes of heating time.
OP:80 Allows use of preprogrammed pads only.
OP:81 Allows use of manual time entry and preprogrammed pads.
OP:90 Allows 10 (0-9) preprogrammed pads.
OP:91 Allows 100 (00-99) preprogrammed pads.
OP:00 Do not display message.
OP:01 Display message for 24 hours every 7 days.
OP:02 Display message for 24 hours every 30 days.
OP:03 Display message for 24 hours every 90 days.
F
or full product documentation visit:
™ www.amanacommercial.com/wavelink
16026795
0P:
displays.
© 2004 Amana Appliances
Amana, Iowa 52204
A–3