Viking 100 Series Use & Installation Manual page 3

Cart Door Adjustment
The cart doors come adjusted from the factory. Depending on how level the surface the cart is being placed on, the
door(s) may need to be adjusted after teh grill is assembled on the cart.
There are two adjustment screws on the hinge receiver.
1) The front screw is used to center the door in the opening. Turning the front screws in or out will center the door in the frame.
2) The back screw is used to align the front of the door with the cart frame and secure the door to the cart. Slightly loosen the
screw and slide the door in or out. Retighten the screw to secure the door.
Door Hinge
(2 places)
Back Screw
Front Screw
4
CART DIMENSIONS 500 Series
30" W. Cart – Front
61 1/2" (156.2 cm) 61 1/2" (156.2 cm) 61 1/2" (156.2 cm)
38 3/4" (98.4 cm) 38 3/4" (98.4 cm) 38 3/4" (98.4 cm)
29 3/8" (75.6 cm) 29 3/8" (75.6 cm) 29 3/8" (75.6 cm)
30" (76.2 cm) 30" (76.2 cm) 30" (76.2 cm)
30" W. Cart – Side
23 7/8" (60.6 cm) 23 7/8" (60.6 cm) 23 7/8" (60.6 cm)
3/4" 3/4" 3/4"
(1.9 cm) (1.9 cm) (1.9 cm)
30 1/16" (76.4 cm) 30 1/16" (76.4 cm) 30 1/16" (76.4 cm)
37 1/2" 37 1/2" 37 1/2"
(95.3 cm) (95.3 cm) (95.3 cm)
36 1/2" 36 1/2" 36 1/2"
(92.7 cm) (92.7 cm) (92.7 cm)
2 1/4" 2 1/4" 2 1/4"
(5.7 cm) (5.7 cm) (5.7 cm)
5