Yamaha BRUIN YFM25BV Owner's Manual page 135

2. Turn in the adjusting nut on the brake ca-
ble to provide a gap of 0–1 mm (0–
0.04 in) between the lever and the pin.
1. Adjusting nut (brake cable)
3. Pin
2. Lever
a. Gap
3. Turn the adjusting bolt until the free play
at the brake lever pivot is 5.0–7.0 mm
(0.20–0.28 in).
1. Locknut
a. Rear brake lever free play
4. Tighten the locknut.
5. Install the footboard.
8-32
2. Adjusting bolt