Clearing Blockages - Vax Swift V-074 Instruction Manual

V-074_Artwork.qxd
Dirt Container & Filters: Removal & Replacement/Storage
6. Dirt Container & Filters: Removal
& Replacement
IMPORTANT: Always unplug the vacuum cleaner
from the electrical outlet before removing the dust
bag.
IMPORTANT: Do NOT use the vacuum cleaner
without ALL of the filters in place.
IMPORTANT: The vacuum cleaner is equipped
with a bag full indicator. If the indicator turns red,
the bag will need to be changed.
Fig.6/1
1. Turn off the vacuum cleaner and unplug from the
electrical outlet. Lift up the top cover to gain access
to the dust bag compartment. (Fig6/1)
Fig.6/2
2. Push in the tab to unlock the bag from position
and lift out. (Fig.6/2)
3. Dispose of the full dust bag and insert a new
dust bag. Click into place, then close the top cover.
Pre Motor Filter:
1. Turn off the vacuum cleaner and unplug from the
electrical outlet. Lift up the top cover to gain access to
the dust bag compartment.
2. Lift out the pre-motor filter situated at the back of
the compartment (Fig.6/3) and replace with new one.
6
30/3/06 12:50 Page 7
Fig.6/3
N.B. Vax recommend replacing the filter after 5 bag
changes or when it appears soiled.
Post Motor Filter:
1. Turn off the vacuum cleaner and unplug from the
electrical outlet.
2. Located at the rear of the vacuum cleaner is the
post-motor filter. This can be removed (Fig.6/4) and
replaced with a new one.
Fig.6/4
N.B. Vax recommend replacing the filter every 4-6
months, when the bag has been emptied 5 times,
when appearance is soiled or when loss of suction is
experienced (whichever is sooner).

7. Clearing Blockages

WARNING: To reduce the risk of electric shock,
the power cord must be disconnected before
performing maintenance/troubleshooting checks.
1. Switch the vacuum cleaner off and disconnect
the power plug from the electrical outlet.
2. The flexible hose can be disconnected from the
vacuum cleaner by pushing in the button on the
hose and pulling away
from the machine.
(Fig.7/1). Remove any
blockages found then
reconnect the hose
securely.
Fig.7/1