Installing Or Replacing A Memory Module - Lenovo ThinkCentre 2697 User Manual

Hide thumbs Also See for ThinkCentre 2697:
Table of Contents

Advertisement

7. Pivot the card latch to the closed position to secure the PCI card.
Figure 15. Installing a PCI card
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 86.

Installing or replacing a memory module

Attention: Do not open your computer or attempt any repair before reading and understanding the "Important
safety information" on page v.
This section provides instructions on how to install or replace a memory module.
Your computer has four slots for installing or replacing DDR3 UDIMMs that provide up to a maximum of
32 GB system memory. When installing or replacing a memory module, use 2 GB, 4 GB, or 8 GB DDR3
UDIMMs in any combination up to a maximum of 32 GB.
The following table provides information about the memory module installation rules that you should
consider when installing or removing a memory module. The "X" mark indicates the memory slot(s) into
which the memory module(s) should be installed in different situations. The numbers 1, 2, 3, and 4 indicate
the installation sequence. To locate the memory module slots, see "Locating parts on the system board"
on page 12.
38
ThinkCentre User Guide

Advertisement

Table of Contents
loading

Table of Contents