Specifications - Brookstone iDesign Instructions Manual

REMOVINg THE SPEAKER gRILLE
Gently pull the speaker grille away from the unit . The speaker grille posts will pull
free from the rubber grommets .
CONNECTINg OTHER STEREO COMPONENTS
Connect an MP3 Player to the AUX IN jack using a 3 . 5 mm to 3 . 5 mm cable
(included) . The unit automatically changes to auxiliary mode . Use your MP3 Player
as you normally would .
Note:
The Remote Control will not control an MP3 Player in auxiliary mode.
Connect the Audio Out terminals of TV, VCR or DVD Player to the AuX IN
jack by using audio cords with mini plugs (not included).
OuTPuTTINg SOuND TO OTHER EQuIPMENT/SPEAKERS
Connect the AUX OUT jack on the back of the unit to other equipment
or speakers by using audio cords with mini jacks (not included) .

sPecificaTions

Power Supply: . . . . . . . AC~120V/60Hz
Speaker Units: . . . . . . . . 2 x 2" speakers (4 ohm)
1 x 6" speaker (4 ohm)
Power Output: . . . . . . . 2 x 15W + 1 x 35W
Dimensions: . . . . . . . . . . 7 " W x 40" H x 12" D
Weight: . . . . . . . . . . . . . . 23 lbs
15