Support Information; Safety Instructions; Power Supply (Optional) - Hama 00053121-V2 Operating Instruction

Usb 3.0 controller pcie

Hide thumbs

Table Of Contents

Table of Contents

Available languages

• Close the case of your computer, and reconnect it to

power.

• Turn your computer back on.

PCIe Express

Einsteckkarte /

Slot card

PCIe Steckplatz / PCIe Slot

Replacing the slot cover

(optional for use with a mini PC)

The slot cover is connected to the card with two screws.

Loosen the screws carefully using an appropriate screw-

driver. Take special care not to damage the card.

After you have removed the screw and the slot cover,

replace it with the low-profi le slot cover. Attach the cover

using the two screws and tighten them carefully. Install

the card in your computer as described in the section on

hardware installation.

Safety instructions:

Keep this device away from heaters and radiators and

free of dust or moisture when operating.

Power supply (optional)

The card is equipped with an internal four-pin power

connection.

You usually connect the power connection to you

computer's internal power supply if you use USB devices

that do not have a power supply of their own.

Carefully insert a free power supply cable from your com-

puter into the power connection. Ensure that the plug is

turned correctly when you insert it. With the right polarity,

it can be inserted without exerting much force.

Caution: ! If the plug is turned the wrong way, the power

supply, computer or card may be damaged.

Hama GmbH & Co KG accepts no liability for damage that

arises from a failure to observe these instructions.

00053121man_V2_cs_de_el_en_es_fi_fr_hu_it_nl_pl_pt_ro_ru_sk_sv_tr.indd 9

Slotblech /

Slot plate