Advertisement
4. With the control handle in "neutral" (free)
position a s shown.
SCAMP AND UTILITY MODELS
SERVICING
6.
Secure upper
and lower control rods
together with the clamp screw as
shown.
This screw should be tightened securely
SELF=PROPELLED BELT DRIVE
by hand.
5. With the clutch arm resting on the handle
and wheel bracket as shown.
SAFETY WARNING
IMPROPER TIGHT.ENING OF CLAMP
SCREW ON CONTROL ROD MAY
RESULT IN OPERATOR LOSS O F
DRIVE CONTROL MECHANISM.
NOTE
To put mower in motion, pull upward
on control handle and
hold in drive
position. To stop forward motion
of mower, release control handle.
Mower drive mechanism functions
only when the control handle
is held
in "DRIVE" position.
Advertisement
