Balboa Water Group GEMINI PLUS II Owner's And Operator's Manual
  1. Manuals
  2. Brands
  3. Balboa Water Group Manuals
  4. Water Pump
  5. GEMINI PLUS II
  6. Owner's and operator's manual

Balboa Water Group GEMINI PLUS II Owner's And Operator's Manual

Whirlpool bath pumps
Hide thumbs
1
2
3
4

Advertisement

Table of Contents

GEMINI PLUS II
OWNER'S AND OPERATOR'S MANUAL
MODELS ARE UL RECOGNIZED
1795 AND / OR CSA (CUL)
CERTIFIED WHERE APPLICABLE.
CHECK PUMP NAMEPLATE
OR CONSULT FACTORY FOR
SPECIFIC APPROVALS.
SAVE THESE INSTRUCTIONS -- FAILURE TO FOLLOW INSTRUCTIONS
MAY RESULT IN PERSONAL INJURY, DEATH OR PROPERTY DAMAGE.
WHIRLPOOL BATH PUMPS
®
PLEASE FILL IN INFORMATION FROM
PUMP NAMEPLATE
PUMP MODEL __________________________
SPEC NUMBER _________________________
DATE CODE ____________________________
TUB MANUFACTURER __________________
NR
Regular discharge
A
Airswitch
-C
Power Cord with Plug
-CJ
Power Cord with JJ Plug
6012400 Rev C November 2, 2009

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GEMINI PLUS II and is the answer not in the manual?

Questions and answers

Diane
April 3, 2025

How long can motor run continuously for whirlpool bath b4 needing to cool or rest.

User image 67eec56750401
0

Subscribe to Our Youtube Channel

Related Manuals for Balboa Water Group GEMINI PLUS II

Summary of Contents for Balboa Water Group GEMINI PLUS II

  • Page 1 GEMINI PLUS II WHIRLPOOL BATH PUMPS ® OWNER’S AND OPERATOR’S MANUAL Regular discharge Airswitch Power Cord with Plug Power Cord with JJ Plug MODELS ARE UL RECOGNIZED PLEASE FILL IN INFORMATION FROM 1795 AND / OR CSA (CUL) PUMP NAMEPLATE CERTIFIED WHERE APPLICABLE.

  • Page 2: Important Safety Instructions

    The GEMINI PLUS II ® pump is intended for use in Hydromassage Bathtub (whirlpool bath) indoor applications only, as described in this manual. The GEMINI PLUS II pump is not for use in any other ® application. Do not use attachments not recommended by the manufacturer.

  • Page 3: Wiring Instructions

    HAND TIGHTEN the union nut only! Excessive torque is unnecessary and may cause damage to the union and pump. DO NOT use a pipe wrench or over torque the nut! There is a gasket supplied with the sleeve connector. If the connector is tightened properly there is no need for any sealant or lubricant to be used on the gasket.

  • Page 4: Save These Instructions

    BASIC OPERATION AND MAINTENANCE (cont.) Other points to keep in mind: • The pump/motor assembly does not require maintenance. However, the tub and pump should be checked • semi-annually for leakage of any kind. • The electric motor uses sealed grease bearings, which do not require additional lubrication. The pump should not be run dry (without water).

Table of Contents