E-Mu 1212m Owner's Manual page 124

6 - Appendix
Technical Specifications
Specifications: 1616
Input Impedance
ANALOG LINE OUTPUTS
Type
D/A Converter
Level (software selectable)
Frequency Response
Dynamic Range
Signal-To-Noise Ratio
THD + N
Stereo Crosstalk
Output Impedance
MIC PREAMP/LINE INPUT (2)
Type:
Gain Range:
Frequency Response:
Stereo Crosstalk:
HI-Z LINE INPUT
Input Impedance:
Max Level:
Dynamic Range:
SNR:
THD+N:
MICROPHONE PREAMP
Input Impedance:
Max Level:
EIN:
124
m
PCI System
10K ohm
(6)
Balanced, low-noise, 2-pole low-pass differential filter,
AC-coupled
CS4398
Professional: +4dBu nominal, 20 dBu maximum
(balanced)
Consumer: -10 dBV nominal, 6 dBV maximum (unbal-
anced)
(20 Hz - 20 kHz): +0.0/-0.06 dB
(1kHz, A-weighted): 120 dB
(A-weighted): 120 dB
(1kHz at -1dBFS): -105 dB (.0006%)
(1kHz at -1dBFS): < -115 dB
560 ohms
E-MU XTC combo mic preamp & Hi-Z line input w/ soft
limiter
+60 dB
(min. gain, 20Hz - 20kHz) +0.0/-0.1dB
(1kHz, min. gain, -1dBFS), -115 dB
1M ohm
+18 dbV (20.2 dBu)
(A-weighted, 1kHz, min. gain: 118 dB
(A-weighted, min. gain): 118 dB
(1kHz at-1dBFS): -105 dB (.0006%)
1.5 Kohm
+6 dbV (8.2dBu)
(20Hz-20kHz, 150 ohm, unweighted): -129.5 dBu
Creative Professional