Zenza Bronica ETRS User Manual page 26

Film Back Interchangeability (con't)
Film
665
667
668
669
107
108 P2
87
88
·
·
Film Winding Systems
The ETRS, together with two types of accessory film-winding systems, gives the user many
types of film-winding/shutter cocking systems or film-winding crank, film-winding lever,
automatic motorized winding and even remote control motorized action, which means that
its possible to choose the system most suited to the occasion.
ASA#
75
3000
75
80
3000
75
3000
75
There are 5 types of film backs: -
*Film Back ETRS 120 (15 exposures)
*Film Back ETRS 220 (30 exposures)
*Film Back ETRS 135N
Frame Size: 24 x 36mm
*Film Back ETRS 135W
Frame Size: 24 x 54mm
*Polaroid ® Pack Film Back E (8 exposures)
Speed Grip E
Attaching the Speed Grip E makes it suitable for fast operations like the
35mm SLR, in both horizontal and vertical formats, without any changes
in handling. And, at the same time, it provides fast thumb-stroked
speed-lever actions. And, a built-in shutter release button, which is
automatically connected to the release system upon attachment, gives
it fast shooting speed comparable to smaller cameras while a built-in
hot shoe permits use of cordless electronic flash units on top of the
accessory.
Motor Drive E
Simply attaching the Motor Drive E converts it to fully motorized opera-
tion, with automatic winding, continuous motorized shooting or remote
control motorized operations and, when the AE-II Finder E is also used,
you have a camera, which is automated to a very high degree.
For Print Size (cm)
B & W / Neg.
B & W
Color
Color
B & W
Color
B & W
Color
Exposures
8.3 x 10.8
8.3 x 10.8
8.3 x 10.8
8.3 x 10.8
8.3 x 10.8
8.3 x 10.8
8.2 x 8.6
8.2 x 8.6
8
8
8
8
8
8
8
8
26