Film Unloading; Setting The Shutter Speed Dial - Zenza Bronica ETRS User Manual

9. Film Unloading

10. Setting the Shutter Speed Dial

A. After the 15th exposure of the 120 roll film (30th exposure of the
220 roll film), the film-winding crank will turn freely with further rota-
tions. Therefore, continue rotating the film-winding crank until the
remaining film and all leader paper is wound up on the take-up
spool. Open the back cover when winding action becomes very light.
B. Remove the film holder and, while preventing the loose film from
unwinding, take out the take-up spool. Seal the exposed film and
return it to its original box until development.
* Always load 120 roll film in Film Back ETRS 120 and 220 roll film in
Film Back ETRS 220.
* Load and unload film away from direct sunlight and/or strong illu-
mination.
A. The shutter speed scale is viewed in its window over the shutter
speed dial. Numbers 1 to 8S are full numbers and 2 to 500 are frac-
tions of a second. Thus, "8S" is 8 sec., "2S" is 2 sec. and "500" is 1/500
sec. Intermediate settings are not possible.
* The shutter is only released at 1/500 sec., when the battery is not
loaded or is completely drained.
B. Red-colored numbers on the scale are full number settings of 1
second and longer while white-colored numbers are settings from ½
to 1/500 second. See 12. Time (T) Exposures. There is no bulb (B) set-
ting. The shutter speed setting can be changed before or after the
film is advanced.
11