GE 22-27 Owner's Manual page 15

Clean the condenser coils at least
once a year.
Behind the Refrigerator
Be careful when moving the refrigerator
away from the wall. All types of floor cover-
ings can be damaged, particularly cush-
ioned coverings and those with embossed
surfaces.
Pull the refrigerator straight out and return
it to position by pushing it straight in.
Moving the refrigerator in a side direction
may result in damage to the floor covering
or refrigerator.
Under the Refrigerator
For most efficient operation, keep the
area under the refrigerator clean. Remove
the base grille and sweep away or vacuum
up dust.
For best results, use a brush specially
designed for this purpose. It is available at
most appliance parts stores.
Preparing for Vacation
For long vacations or absences, remove
food and unplug the refrigerator. Move
the control to the OFF or 0 position, and
clean the interior with a baking soda solu-
tion of one tablespoon (15 ml) of baking
soda to one quart (1 l) of water. Leave the
doors open.
Move the icemaker feeler arm (on some
models) to the STOP (up) position and shut
off the water supply to the refrigerator.
Preparing to Move
Secure all loose items such as grille, shelves and drawers by taping them securely
in place to prevent damage.
Be sure the refrigerator stays in an upright position during moving.
When pushing the refrigerator back,
make sure you don't roll over the power
cord or icemaker supply line (on some
models).
To remove the base grille, open both doors,
grasp the bottom of the grille and pull it out.
To replace base grille, line up the clips on the
back of the grille with the openings in the
base plate and push the grille forward until
it snaps into place.
If the temperature can drop below freezing,
have a qualified servicer drain the water
supply system (on some models) to prevent
serious property damage due to flooding.
15