GE 200D8074P039 Owner's Manual And Installation page 18

MOVING THE REFRIGERATOR
DISCONNECT THE POWER COUPLING
4
(on some models)
If the refrigerator has a water dispenser,
there is a power line (harness) from the cabinet
into the bottom hinge on the freezer door that
must be disconnected.
To disconnect, pull apart at the coupling.
Bottom
freezer
hinge
DISCONNECT THE ELECTRICAL
5
CONNECTORS (on some models)
If the refrigerator has a refreshment center,
there are electrical connectors (harnesses)
from the cabinet into the bottom hinge on the
refrigerator door that must be disconnected.
To disconnect, pull apart each connector.
Installation Instructions
(CONT.)
Bottom
refrigerator
hinge
18
CLOSE THE FREEZER AND
6
REFRIGERATOR DOORS
REMOVE THE FREEZER DOOR
7
Remove the freezer door top hinge cover by
A
either squeezing it and pulling it up or by
prying it off with a plastic putty knife.
Remove the two 5/16" hex head screws, then
B
lift the hinge straight up to free the hinge pin.
5/16" Hex Head
Open the freezer door to 90. °
C
90°