Philips VELO500 User Manual page 39

5 Quit all programs, and turn off your Velo 500.
6 Slide back the switch to open the door to the Flash/ROM
slot, and remove the door and the dummy card.
Note Save the dummy card so you can reinsert it if you
remove the flash memory Miniature Card.
7 Insert the flash memory Miniature Card and replace
the door.
8 Turn on your Velo 500.
Figur Figur e 8: e 8: Inser Inser ting a flash memor ting a flash memor
Figure 8: Figur Figur e 8: Inser e 8: Inser Inserting a flash memor ting a flash memor ting a flash memory Minia
You can open files and folders in the PC Card folder as you would
in any other folder on your Velo 500.
To remove a flash memory Miniature Card
1 Quit all programs and turn off your Velo 500.
2 Slide back the switch to open the door to the Flash/ROM
slot, and remove the door.
3 Remove the flash memory Miniature Card.
4 Replace the dummy card and the door.
5 Turn on your Velo 500.
y Minia y Minia tur tur e Card d d d d e Car e Car
y Minia y Miniatur ture Car tur e Car
43