Maintenance - HoMedics WFL-OLBR Instruction Manual And Warranty

Fig. 4
Clean
Water
Switch

MAINTENANCE:

1. To keep water clean:
periodically change water and clean the product according
to the water condition. Keeping the water clean prevents the
water from becoming sticky and forming micro-organisms. We
recommend distilled water to prevent mineral build-up.
2. To clean off hard water deposits on the base:
use a mixture of vinegar and water to clean and remove any
mineral build-up from the base and pump.
3. Keeping the water at an optimum level:
add water periodically to keep water level at an optimum level
and to avoid shortening the life of the pump. Note: never let
the pump run dry.
4. Fountain Storage
unplug the fountain from the electrical outlet, empty the water,
let the fountain dry completely, and store in a dry, cool place.
Fig.5
adaptor
drip loop
6
5. To clean the pump:
unplug from electrical outlet. remove it from the base of the
fountain. use a small brush or stream of water to remove any
debris (Fig. 6)
Fig. 6
Back Cover
Pump Housing
Rotor
Gland
Flow Regulator
Filter
Caution:
All servicing of this fountain must be performed by authorized
HoMedics service personnel only.
7