Advertisement
BUTTONS
Power Button
1. Power Button
• Short press play/pause ball
• Long press lights and ball off
2. Light Button
• Short press cycles through saved colors
• Long press lights on/off
SET UP
1. Remove all protective materials over the felt surface inside your drift bowl. Pour
one bag of sand into the center of the table and use the included sand rake to level
the sand (does not need to be perfect).
2. Place the metal ball into the center of the table; it will find the magnet. If it does not
find the magnet right away, the magnet will find the ball during the first design.
3. Place the glass foam side down on the top and center it.
4. Untie power cord, attach one of the provided plug adapters to suit your needs, and
insert the USB-C adapter into the back of the drift sandscape. Then plug in the
adapter plug into the appropriate outlet. The ball will start moving and the lights
will illuminate. If not, press and hold the light button to turn on the lights.
5. Download the drift Sandscape App from the app store.
6. Follow the instructions within the app for set up and get ready to drift.
MAINTENANCE
1. Even out the sand. Over time, sand may build up on the outside of the sand surface.
You can use the included sand rake or any flat card to redistribute sand as needed.
2. You can clean the glass surface with any glass cleaner.
3. The product is built to give you 8 hours of continuous use. If it has stopped and you
want to drift longer, restart in the app or short press the power button on the back
of the unit.
3
Light Button
Advertisement
