Advertisement
EMC Regulations: EN50081-1, EN50082-1
Polarity: Automatic, (-) negative polarity indication.
Over-range: "1" mark indication
Low battery indication: The "BAT" is displayed when the battery voltage
drops below the operating level.
Measurement rate: 2 times per second, nominal
Continuity test: Audible threshold 0 -10K, Continuity beeper 2KHz
Input Impedance: 400K
o
o
Temperature: Operating:-10℃ to +50℃(14
F to 22
F),
Storage:-30℃ to +60℃
Altitude: Operating: 3,000m; Storage: 10,000m
Relative Humidity: 90%(0℃-30℃);75%(30℃-40℃); 45%(40℃-50℃)
Battery Type: AA (2); NEDA 15F or IEC R6
Replacing the Batteries
If the sign "BAT" appears on the LCD, it indicates that the batteries should be
replaced. Remove screws on the back cover and open the case. Replace the
exhausted batteries with new batteries. (AA (2); NEDA 15F or IEC R6)
2xAA
Disconnect probes
Do not
from Voltage
over-tighten screws
www.pyleaudio.com
Advertisement
