Email Notification Setup - GE Security Triplex DVMRe 16eZT User Manual

q Main Menu
Use this menu to link an alarm input to a macro. If a link is created,
a macro will run each time that alarm is activated.
Alarm: Select the alarm input you would like to link.
Macro: Select the macro number you wish to link to. Leave this
setting blank if you do not wish to link to a macro.
Rotate the Jog to navigate, and the Shuttle to change
the values.
Save changes and exit the menu: Select [OK], then press the
Enter button.
Exit the menu without making changes: Press the Menu
button, or select [CANCEL], then press the Enter button.
q Main Menu
Use this menu to configure the internal buzzer.
Global Buzzer: The Global Buzzer setting acts as a master On/Off
switch. Setting the Global Buzzer to OFF deactivates all buzzer
activity.
q Main Menu
Use this menu to select Email Alarm Notification.

Email Notification Setup

This screen allows the user to setup the types of events to be notified of, and the email addresses (up
to two) to be notified. Follow the context sensitive on-screen instructions to setup the individual fields.
Also, please note that the Region/Time Zone setting must be set correctly for Email notification to time
stamp messages accurately. If the Notify Alarm or Notify Record fields are enabled you will notified of
the results of the Hard Disk Test.
0150-0198H
Alarms Link To A Macro
Alarms Buzzer Setup
Alarms Notification
39
Buzzer Setup
Global Buzzer :
[CANCEL] [OK]
Email
DVMRe Triplex eZ
ON