Editing Or Deleting An Existing Qos Policy - NETGEAR WNR3500Lv2 User Manual

3. From the Priority Category list, select MAC Address to display the following screen:
4.
If the device to be prioritized appears in the MAC Device List, select its radio button. The
information from the MAC Device List populates the policy name, MAC Address, and Device
Name fields. If the device does not appear in the MAC Device List, click Refresh. If it still
does not appear, you have to complete these fields manually.
5.
From the Priority list, select the priority that this device's traffic should receive relative to
other applications and traffic when accessing the Internet. The options are Low, Normal,
High, and Highest.
6. Click Add to add a new QoS policy to the MAC Device list. Then click Apply to save this
rule to the QoS Policy list and return to the QoS Setup screen.
7. In the QoS Setup screen, select the Turn Internet Access QoS On check box.
8. Click Apply.

Editing or Deleting an Existing QoS Policy

To edit or delete a QoS policy:

1. Select Advanced > QoS Setup to display the QoS Setup screen.
2.
Select the radio button next to the QoS policy to be edited or deleted, and do one of the
following:
• Click Delete to remove the QoS policy.
• Click Edit to edit the QoS policy. Follow the instructions in the preceding sections to
change the policy settings.
3. Click Apply in the QoS Setup screen to save your changes.
N300 Wireless Gigabit Router WNR3500Lv2
Genie Advanced Home
45