Monster Turbine Pro Manual And Warranty page 12

2. Use warm water and mild soap on a damp cloth to remove dirt and earwax
from the eartip. Do NoT use harsh cleaning agents.
3. Rinse and completely dry your eartips before placing them back
on your Turbine Pro.
4. Carefully push the eartips back onto the Turbine Pro, making sure they
are on the eartube completely.
Using The Cable Management Clip
The Cable Management Clip is designed to control the cable and keep it out of your
way, reduce accidental pulling of the in-ear speakers from your ears, and keep
the cable weight off the in-ear speakers so they stay snug and in place in your ears.
1. Put Turbine Pro In-Ear Speaker
when listening.
11
™
into your ears, as you usually would
™
2. Fasten the Cable Management Clip onto your shirt around
the chest or collar area, wherever is most convenient
for the shirt you're wearing.
3. Grab the cable above the Cable Management Clip and pull
it slightly upward, sliding it through the clip to create
enough slack between the in-ear speakers and clip
to allow for head movement and to take the stress
off the in-ear speakers.