Advertisement
Available languages
Available languages
Assembling the Trapeze
NOTE: For this procedure, refer to FIGURE 1.
NOTE: Invacare recommends that two people assemble the Bariatric Trapeze.
The weight of the Bariatric Trapeze components are between 17 lbs (7.72 kg) and 21 lbs (9.53
kg). Use proper lifting techniques (lift with your legs) to avoid injury.
1.
Remove shipping end caps (yellow) from A‐frame.
2.
Insert the base assemblies into the A‐frame.
3.
Depress the snap button on one base assembly and slide
it into the A‐frame until the snap button protrudes
through the hole in the A‐frame.
NOTE: The base assembly will lock when an audible ʺclickʺ is
heard.
4.
Repeat STEP 3 for the other base assembly.
5.
Slide the mast and boom tube assembly onto the
A‐frame, with the boom tube on the same side as the
base assembly legs.
6.
Loosen trapeze knob by turning counterclockwise.
7.
Slide the trapeze clamp over the end of the boom tube.
8.
Depress the snap button on the boom tube and slide the
trapeze clamp over the snap button.
9.
Adjust the trapeze. Refer to Adjusting the Trapeze on
page 2.
Adjusting the Trapeze
Ensure that the trapeze clamp is securely tightened BEFORE using the trapeze, otherwise injury
may occur.
NOTE: For this procedure, refer to FIGURE 2 on page 3.
Height
1.
Position the desired chain link onto the free ʺSʺ hook on the trapeze clamp (Detail ʺAʺ).
Position
1.
Loosen trapeze knob by turning counterclockwise (Detail ʺAʺ).
2.
Slide the clamp to desired position on the boom tube.
3.
Secure the trapeze clamp to the boom tube by turning the knob clockwise.
Rotation
NOTE: The mast and boom tube can be rotated to three positions.
Bariatric Trapeze
WARNING
Boom Tube
Assembly
Mast
Snap
Buttons
Base Assemblies
FIGURE 1 Assembling the Trapeze
WARNING
2
Snap Button
A-Frame
Trapeze
Trapeze
Clamp
Knob
Base Assembly Legs
Part No 1106663
Advertisement
