2. In DTV mode
Use "-" button to select the sub channel in DTV.
Ex: Your desired number is 80-3.
Press 8 → press 0 → press "-" → press 3.
•
Whether in ATV or DTV, after you input the channel numbers, press ENTER button to direct
to the channel immediately, or wait for 3 seconds to change automatically.
•
Return to the previous channel, press RETURN button.
※ How to switch between Air TV and Cable TV?
When in TV mode, press TV/CATV button to switch, or go to the Tuner Mode in the TV menu to
select.
Sleep Time Setting
Repeatedly press SLEEP button to set the off timer. The function is used to automatically shut off
the LCD TV after a preset period of time passed. There are several times for choice –Off,
Minutes, 30 Minutes, 45 Minutes, 60 Minutes, 90 Minutes, or 120 Minutes.
Using the OSD function
You can use the OSD menus and options to adjust various settings by using the remote control.
The basic operation is as following:
Press MENU to display OSD menu.
Press ▲▼ to select your desired top Menu, and press ENTER or
Use ▲▼ to select the control you want to adjust.
When selecting the control with II►, press ENTER to enable the function.
Press ◄► to adjust or select the settings.
Press MENU to exit from the OSD menu.
Aspect Ratio Table
Source
Standard
AV/ S-V/
YPbPr/
NTSC
HDMI
SD
YPbPr/
HD
HDMI
HD
SD
DTV
HD
HD
• Aspect Ratio function does not support on PC Timings.
Mode
Resolution
Full Letterbox Panorama
480i (60Hz)
Yes
480p (60Hz)
Yes
720p (60Hz)
Yes
1080i (60Hz)
Yes
480p (60Hz)
Yes
720p (60Hz)
Yes
1080i (60Hz)
Yes
Aspect Ratio Handling
Yes
Yes
Yes
Yes
No
No
No
No
Yes
Yes
No
No
No
No
23
►
to enter it.
Zoom No Scale Normal
Yes
Yes
Yes
Yes
Yes
Yes
No
No
Yes
Yes
No
No
No
No
15
Yes
Yes
Yes
Yes
Yes
Yes
Yes