Cycle Guide - Kenmore 796.4147 Use & Care Manual

HOW TO USE

CYCLE GUIDE

The cycle guide below shows the default settings, available options and recommended fabric types
for each cycle. Allowable modifier adjustments are shown below the default setting for each cycle.
Fabric or
Cycle
Load Type
Cotton, linen,
towels, shirts,
Normal
sheets, jeans,
mixed loads
Large items
Bulky/ such as
Bedding blankets and
comforters
Specifically
designed to
Kids clean and
Wear thoroughly
rinse kids
wear
Heavily
Heavy
soiled
Duty
cotton fabrics
Heavily
soiled items,
Sanitize such as work
clothes,
diapers, etc.
Heavily to
Whitest normally
Whites soiled white
cottons
NOTE:
• To protect your garments, not every wash temperature, spin speed, soil level, or option is available with every
cycle. A chime will sound and the LED will not light if the selection is not allowed.
• The washer automatically adjusts the wash time for the amount of laundry, water pressure, water heating time and other
operating conditions.
• These cycles use various wash motions to enhance cleaning and/or fabric care performance. The wash motions may sound
different at different stages of the wash cycle. This is normal.
• The recommended load size for the Sanitize cycle is 10 lbs.
• When the Accela-wash option is selected, the drum spins to rinse the clothes. To use the No Spin option, you must
deselect the Accela-wash option.
Display
Load Wash
Time
Sensing Motion
(Min.)
32-50 Yes Yes
56 No Yes
86-96 Yes Yes
80-98 Yes Yes
98-107 Yes Yes
66-76 Yes Yes
Wash Spin Soil
Temperature Speed Level
Warm High Normal
Extra
Hot High
Heavy
Tap Cold No Spin
Light
Cold Low
Medium
Warm Medium Normal
Hot
No Spin Heavy
Tap Cold
Low Light
Cold
Hot High Heavy
Extra
Tap Cold High
Light
Cold No Spin
Normal
Warm Low
Medium
Extra
Warm Heavy
High
No Spin
Hot
Low Light
Tap Cold
Medium Normal
Cold
High
Extra Hot High Normal
Extra
High
Heavy
No Spin
Light
Low
Medium
Hot High Normal
Extra
Tap Cold High
Heavy
Cold No Spin
Light
Warm Low
Medium
14
Accela- Steam Extra Auto
Wash Treat Rinse Soak
= Available Option
= Default Setting
Save Pre-
Energy Wash