ConneCTinG The rS-485 deviCe
Connect the rear [rS-485 +, –] port to the PTZ camera or system keyboard.
You can connect and control the PTZ camera which supports the RS-485 communication.
J
`
Check if the RS-485 device is compatible with the product first.
`
Pay attention not to change the polarity (+/-) of the RS-485 device when connecting it.
`
Depending on camera's type, connection polarity can be different. For further information,
`
refer to the respective PTZ Camera's documentation.
ConneCTinG The neTworK
The following figures are based on Model SDR-5100.
`
Connecting to network through ethernet (10/100BaseT)
Hub/Switcher
Windows
Network Viewer
+ -
RS 485
RJ-45 Ethernet Cable
(Direct Cable)
NETWORK
Hub/Switcher
English _19