Warming Drawer - GE Profile JGB905 Owner's Manual & Installation Instructions

Care and cleaning of the range.
36
Warming Drawer Pan
(on some models)
The warming drawer has a removable pan
for easy cleaning.
Remove the pan, using the side edge
handles and clean it with detergent and
water. After cleaning, rinse with clean water
and dry with a clean cloth. Replace the pan
in the warming drawer.
Removable Drawer
NOTE: For models with an electric warming
drawer, before performing any adjustments,
cleaning or service, disconnect the range electrical
power supply at the household distribution panel
by removing the fuse or switching off the circuit
breaker. Make sure the warming drawer heating
element is cool.
Most cleaning can be done with the drawer
in place. However, the drawer may be
removed if further cleaning is needed. Use
soap and warm water to thoroughly clean.
To remove the drawer:
Pull the drawer straight out until
it stops.
Press the left rail release up and press
the right rail release down, while
pulling the drawer forward and free.
To replace the drawer:
Place the left drawer rail around the
inner left rail guide and slide it in
slightly to hook it.
Place the right drawer rail around the
inner right rail guide and slide it in
slightly to hook it.
Slide the drawer all the way in.