Building A Security Application - Vivotek PT3112 User Manual

Building a security application

The Administrator can combine
options on the application page
to perform many useful security
applications. There are two
trigger sources coming from
attached devices, such as for
motion detection. There are
also two kinds of actions
responding to such events,
including uploading snapshots
over the Internet and driving
other attached devices. To
upload the snapshots, the User
can choose either email or FTP
according to user's needs. Both e-mail and FTP use the network settings on the
network page. Refer to the definition section for detail configuration.
1. Click on "Configuration" on
homepage,
2. Click on "Application" in the left
column,
3. Check the weekdays as you
need and give the period of
"Snapshots begin" time and
"Snapshots end" time to monitor
the triggering conditions every
day,
4. Check the "Event operation". The triggering condition can be set to detected
motion or status of the attached device,
- 26 -
www.vivotek.com
T: 886-2-82455282
F: 886-2-82455532