Pre-Installation - GE JBP79 Installation Instructions Manual

Installation Instructions
Pre-Installation Checklist
_' Preparing the Range
Remove packaging materials. Any
packaging materials must be removed
during installation. This will include
adhesive tape, wire ties, cardboard and
protective plastic. Failure to remove
these materials could result in damage to
the appliance once the appliance has
been turned on and surfaces have
heated.
I_ Open oven door and remove literature
pack, broiler pan and grid, and oven racks.
_ Oven Racks _
Broiler Pan _Literature
and Grid Pack
Remove Installation Instructions
from literature pack and read it
carefully before you begin. Be
sure to place all literature, Use
and Care, Installation
Instruction, etc. in a safe place
for future reference.
_r
_z
_,_,., ___._ ___, Open the oven door as
, far as it will go.
Push the hinge
locks
U_ _ u_i:cg:ed
down toward the
door _sition
frame, to the unlocked "_°_t _!_ "
position. This may
require a flat blade
Hinge
screwdriver. _,m
I_ Close the oven door to
the broil stop position.
Place hands on both
sides of the door. As you
close the door, lift up and
away from the range.
Lift door up until the
hinges clear the slots.
Hinge
L Clears /
Slot
IIoo .oT T.E oooR BY T .E II1
NOTE: The oven door is very heavy. Be sure you
have a firm grip before lifting the oven door off the
hinges. Use caution once the door is removed. Do
not lay the door on its handle. This could cause
dents or scratches.
3