Led State Chart; Driving Using Your Device's Accelerometer; Rotating Spy Camera - Brookstone Rover Revolution Instructions Manual

SSID address to confirm the connection.
4. Exit out of Settings and open the Rover Revolution App.
5. The GREEN CONNECTION LED will now revert from blinking to solid.
6. When your device's screen shows the view from the Rover Revolution's live-
stream video camera—you are ready to start exploring.

LED STATE CHART

LED Location
White Top of unit
White Top of unit
Green Top of unit
Green Top of unit
Red Bottom of unit
Green Bottom of unit
12
State Represents
Solid Power on
Blinking Low battery
Blinking Searching for and acquiring Wi-Fi
connection
Solid Rover Revolution app is open and
Wi-Fi is connected
Solid Battery is charging
Solid Battery is fully charged

DRIVING USING YOUR DEVICE'S ACCELEROMETER

To turn on this function, hold your device flat or tilted upward
slightly (see image at right), and tap the G DRIVE button on your
device' s screen. The manual drive graphics will disappear from your
device' s screen.
To drive the Rover Revolution, tilt your device in the direction you
would like to drive. The Stop position is the position at which the
device was held when the G Drive was activated.
To turn this function off, tap the G DRIVE button and the manual
drive graphics will reappear on your device' s screen.
DRIVING CAMERA
Tap anywhere on the screen to switch between the Driving Camera and the Rotating
Spy camera.

ROTATING SPY CAMERA

Tap anywhere on the screen to switch between the Driving Camera and the Rotating
Spy camera.
Use the Rotating Spy camera controls to move the Rotating Spy camera up, down,
left, and right.
Double-tap the HOME BUTTON to return the Rotating Spy camera to the front
facing position.
13