JVC GV-LS2 User Manual page 16

Chapter 4 Streaming in Real-Time with USTREAM
5. Set the image quality.
After successfully logging in, the window for selecting
the image quality to use for streaming is displayed. The
image quality setting can be changed later at any time
using the [IMAGE QUALITY SETTINGS] button.
However, note that USTREAM Producer needs to be
restarted to reflect this setting.
• [MPEG-2 TS (HD)]
The image quality is high, but the load on the computer
is also high and a large amount of data is transmitted
across the network.
Select when the only one camera is used, the camera
is connected in a wired LAN and you are using a high
speed computer.
• [MPEG-2 TS (SD)]
The image quality is not as good, but the load on the
computer is lower and less data is transmitted across the
network.
Select this when using a wireless LAN, multiple cameras
or a standard computer.
• [AAC SOUND ONLY.]
Select this to use the camera audio only.
6. When using multiple cameras, repeat steps 3 to 5.
7. Exit the setup application.
Exit the setup application by closing the window.
14