About The Epson Status Monitor 3 Utility - Epson LX-1170 User Manual

Settings
Halftone
The monitoring settings are shown below.
Settings
EPSON Status
Monitor 3
Monitoring
Preferences

About the EPSON Status Monitor 3 Utility

The EPSON Status Monitor 3 utility that comes with your printer
is available for Windows Me, 98, 95, 2000 or NT 4.0. It allows you
to monitor your printer's status, alerts you when printer errors
occur, and provides troubleshooting instructions when needed.
The EPSON Status Monitor 3 utility is available only when:
The printer is connected directly to the host computer via the
parallel port [LPT1].
Your system is configured to support bidirectional
communication.
The EPSON Status Monitor 3 utility is installed when you install
the printer driver as described in Chapter 1.
3-12
Using the Printer Software
Explanations
Click this button to set the brightness and contrast, input
the RGB gamma, or make other settings. The Halftone
Color Adjustment dialog box appears. For details, click
the Help button in this dialog box.
Explanations
You can access the EPSON Status Monitor 3 utility
when you click this button. To monitor the printer, make
sure the Monitor the printing status check box is
selected.
Click this button to open the Monitoring Preferences
dialog box where you can make settings for the EPSON
Status Monitor 3 utility. For more information, see
"Setting up EPSON Status Monitor 3" on page 3-13.