Keeping The Lcd Screen In Good Condition; Small Fluorescent Tube; Glossary - Pioneer AVIC-X1 Hardware Manual

MAN-AVIC-X1-EN HW.book Page 24 Friday, January 16, 2004 11:41 AM
• At low temperatures, the LCD screen may be
dark for a while after the power is turned on.
• The LCD screen will be difficult to see if it is
exposed to direct sunlight.
• When using a portable phone, keep the aerial
of the portable phone away from the display
unit to prevent disruption of the video by the
appearance of spots, coloured stripes, etc.
Keeping the LCD screen in good
condition
• When removing dust from the LCD screen or
cleaning the LCD screen, first turn the system
power off, then wipe with the supplied cloth.
• When wiping the LCD screen, take care not to
scratch the surface. Do not use harsh or
abrasive chemical cleaners.

Small fluorescent tube

• A small fluorescent tube is used inside the
display to illuminate the LCD screen.
– The fluorescent tube should last for
approximately 10,000 hours, depending on
operating conditions. (Using the display unit
at low temperatures reduces the service life
of the fluorescent tube.)
– When the fluorescent tube reaches the end
of its useful life, the LCD screen will be dark
and the image will no longer be projected. If
this happens, consult your dealer or the
nearest authorised PIONEER Service
Station.
24

Glossary

Glossary Appendix of the Operation Manual