GE EER3002 Owner's Manual page 28

Self-cleaning radiant ranges
Hide thumbs Also See for EER3002:
Table of Contents

Advertisement

Before you call for service...
Troubleshooting Tips
Problem
Oven not clean after
a clean cycle
Oven makes
clicking noise
CLEAN light is on
when you want to cook
"F— and a number
or letter" flash in
The display goes blank
or indicator lights come
on when range is not
in use
Oven door will
not lock
"Burning" or "oily"
odor emitting from
the vent
Strong odor
28
Possible Causes
Oven controls not
properly set.
Oven was heavily soiled.
This is the sound of the
heating element turning
off and on during
cooking functions.
The oven door was
accidentally locked.
You have a function
error code.
If the function code repeats.
Power surge.
The clock is in the
black-out mode.
Oven too hot.
This is normal in a new
oven and will disappear
in time.
An odor from the insulation
around the inside of the
oven is normal for the first
few times the oven is used.
What To Do
• See the Using the self-cleaning oven section.
• Clean up heavy spillovers before starting the clean
cycle. Heavily soiled ovens may need to self-clean
again or for a longer period of time.
• This is normal.
• Turn the Oven Temperature knob to OFF. Allow the
oven to cool. Then move the latch to the far left.
Never force the door latch handle.
• Turn the Oven Temperature knob to OFF. Put the oven
back into operation.
• Disconnect all power to the range for at least
30 seconds and then reconnect power. If the
function error code repeats, call for service.
• Disconnect power at the fuse box or circuit breaker
for at least 10 seconds. Turn power on and power
up your range. If the indicator lights are still on,
call for service.
• See the Using the clock and timer section.
• Turn the Oven Temperature knob to CLEAN.
The glowing oven cleaning light after the knob is
turned indicates the oven is too hot from previous
use. To cool the oven, open the door wide, and allow
the oven to cool. After the oven has cooled, close
the door and slide the latch handle all the way to
the right.
• To speed the process, set a self-clean cycle
for a minimum of 3 hours. See the Using the
self-cleaning oven section.
• This is temporary.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents