Philips Studio 32HFL2808D/12 User Manual page 16

Store mode
Power Up Mode
Automatic Channel
Scan (Retune)
Manual Channel
Scan
Network Channel
Scan
Analogue Fine Tune
First Time
Installation
Clear Service List
Studio 32/39HFL2808D/12
If enabled will store changes to channels are made.
Power up of TV will be Standby mode or Last Status at moment of power down.
TV Menu Features and Functions
Install and Retune Menu Contents
Displays automatic tuning options.
Digital Aerial: Searches and stores aerial DVB stations.
Digital Cable: Searches and stores cable DVB stations.
Analogue: Searches and stores analogue stations.
Digital Aerial & Analogue: Searches and stores aerial DVB and analogue stations.
Digital Cable & Analogue: Searches and stores cable DVB and analogue stations.
This feature can be used for direct broadcast entry.
Searches for the linked channels in the broadcast system.
You can use this setting for fine tuning analogue channels. This feature is not available if no
analogue channels are stored.
Deletes all stored channels and settings, resets TV to factory settings and starts first time
installation. You can follow the instructions in the Initial Installation section for more
information on this process.
(*) Visible for Denmark, Sweden, Norway or Finland. Clear Service List and then press
OK. The following OSD will be displayed on the screen. Select YES and press OK to
continue or select NO and press OK button to cancel.
P a g e | 16