Maintenance And Adjustments; Maintenance Record - Genie M-4500 Owner's Manual

19. MAINTENANCE AND ADJUSTMENTS

To ensure continued safe operation and extended life of your opener system, periodic checking for proper operation is
necessary. Occasional maintenance and readjustment of your system may also be needed.
MONTHLY
I Check reversal system by performing "SAFETY
REVERSAL TEST" described in this manual.
I Check proper operation of door by
manually moving door open and closed.
If door binds or sticks, or is out of balance
call for garage door service.
I Check and test photo eye safety system
as described in this manual.

20. MAINTENANCE RECORD

Good maintenance of your garage door is an imperative requirement. Not only will it prolong the life of the door
and the opener, but more importantly, it assures your safety and that of others. Use the form below to record the
monthly, yearly, and "as needed" maintenance.
Maintenance Steps
If you run out of Maintenance Record lines, please make yourself another record sheet.
ONCE EVERY
YEAR:
I Keep door rollers, hinges,
and bearings properly
lubricated by following
recommended door
instructions or contacting
a door service company
in your area.
Date Performed By
AS NEEDED:
I Readjust opener travel limits and force settings as necessary
— due to cold weather, normal wear of door, etc.
The convenient adjustment instruction label on the opener
can be used for any periodic adjustments needed.
I Check and readjust belt tension, if necessary, in the unlikely event
that it loses its proper tension during the life of the opener.
I Always check the reversal system after any adjustment of travel
limits or forces. A door opener that is not checked could
possibly be out of adjustment and be dangerous.
Comments
31