Nokia C6-00 User Manual page 53

Add access points to an access point
group
Select the group and
access point.
Copy an existing access point from
another group
Select the group, go to the access point to
copy, and select Options
Copy to other dest..
Change the priority of an access point
within a group
Select Options
>
priority.
Packet data access point settings
Select Menu Settings
>
Connectivity Destinations
>
point, and follow the instructions.
Edit a packet data access point
Select an access point group and access
point marked with
instructions from your service provider.
Select from the following:
Access point name — The access point
name is provided by your service provider.
User name — The user name may be
needed to make a data connection, and is
usually provided by your service provider.
Prompt password — If you must enter
the password every time you log in to a
server, or if you do not want to save your
password in the device, select Yes.
Password — A password may be needed
to make a data connection, and is usually
provided by your service provider.
Authentication — To always send your
password encrypted, select Secure. To
© 2011 Nokia. All rights reserved.
Options New
>
Organise
>
Organise Change
>
and
Access
>
. Follow the
send your password encrypted when
possible, select Normal.
Homepage — Depending on the access
point you are setting up, enter the web
address or the address of the multimedia
message centre.
Use access point — Set the device to
connect to the destination using this
>
access point after confirmation or
automatically.
Modify advanced packet data access
point settings
Select Options
Select from the following:
Network type — Select the internet
protocol type to transfer data to and from
your device. The other settings depend on
the selected network type.
Phone IP address (for IPv4 only) — Enter
the IP address of your device.
DNS addresses — Enter the IP addresses
of the primary and secondary DNS servers,
if required by your service provider. To
obtain these addresses, contact your
internet service provider.
Proxy server address — Enter the
address of the proxy server.
Proxy port number — Enter the port
number of the proxy server.
WLAN internet access points
Select Menu
Connectivity
point, and follow the instructions.
To edit a wireless LAN (WLAN) access
point, open one of the access point
groups, and select an access point marked
with .
Connectivity
Advanced settings.
>
Settings and
>
Destinations
>
53
Access
>