Page 1
MODELO: NX-661 AUTOESTEREO CON REPRODUCTOR DE DISCO COMPACTO (DVD, VCD, CD, MP4, MP3) Y RADIO DIGITAL AM/FM Compatible con discos con formato DVD, VCD, SUPER VCD, MP4, MP3, CD MANUAL DE OPERACIÓN FAVOR DE LEER ESTE MANUAL COMPLETAMENTE ANTES DE OPERAR ESTE PRODUCTO.
ÍNDICE 7. Especificaciones 1. Antes de operar 1.1 Definiciones Especificaciones Generales 1.1 Precauciones y mantenimiento Fuente de poder: 12 Vcc 1.3 Mantenimiento y manejo de los discos Máxima potencia de salida: 4 x 25 W (a 14,4 Vcc) 1.4 Información de la batería del control remoto 1.5 Descripción del control remoto Dimensiones aproximadas: 178 x 50 x 165 mm...
1. Antes de operar 6. Guía para la solución de problemas 1.1 Definiciones PBC (Control de Reproducción) Este es un tipo de señal (menú) grabado en discos con formato SVCD o PROBLEMA CAUSA SOLUCIÓN VCD2.0 usados para el control de la reproducción. Para los discos que contienen la función de PBC, estos pueden reproducir el programa interactivo con el menú...
1.3 Mantenimiento y Manejo de los Discos 5.17 Código de Región Mantenimiento de los Discos Para mantener los discos limpios, tomar los discos por los extremos, nunca tocar la superficie P: ¿Por que no empieza la reproducción del disco y la pantalla despliega REGIÓN de reproducción de los discos.
1.5 Descripción del Control Remoto 5.16 Control de Padres "Parental Control" 1. BOTÓN DE MODO "MODE" "Por que después de ingresar un disco DVD en el reproductor, se despliega una ventana de dialogo que pide ingresar los 4 dígitos de la contraseña (password)? 2.
1.6 Descripción del Panel Frontal Seleccione el lenguaje del menú del Permite fijar un nivel de restricción disco deseado. Hay 7 opciones para la exhibición del disco según disponibles: Inglés, Francés, la edad. Español, Alemán, Chino, Japonés o Nota: si usted desea cambiar el grado de Koreano.
1.7 Descripción del chasis de la unidad RESET Ajuste el brillo al nivel deseado. Ajuste el contraste al nivel deseado. 1. Indicador LED: destella cuando el panel frontal es removido. 2. Resetear: presione este botón para borrar todos los ajustes y volver la unidad a cero.
1.9 DESCRIPCIÓN DE LA PANTALLA LCD EN EL PANEL FRONTAL A j u s t e D o w n m i x , p e r m i t e Ajuste Monodual, pero ajustar el seleccionar la salida LT/RT o canal de salida deseado.
1.10 Descripción de los cables de conexión Conector de Antena Amarillo Memoria B+ Filtro - Linea de salida Woofer Negro (Tierra) Caja de Amarillo fusibles 10 y 1 A Linea de salida RCA Interruptor de Encendido Rojo "Derecho" (R) Rojo 0,5 A Azul Blanco "Izquierdo"...
1.11 INSTALACIÓN 5.15 Operación del menú de configuración 1. Presione el botón SETUP en el control remoto se exhibirá en pantalla el menú de ajuste del sistema el cual consiste de cuatro partes: ajuste general, FORMA DE INSTALACIÓN ajuste de parlantes, ajuste de video y ajuste de preferencias. Esta es una forma de instalación antirrobo, el chasis esta protegido por un armazón metálico.
5.11 Cambiando el lenguaje del subtítulo 2. Operación del Disco y el Radio Durante la reproducción de un DVD, presione el botón SUBTITLE 1. BOTÓN DE PODER "POWER" Estando la unidad encendida, presionar "POWER" por corto tiempo para apagar la unidad y el repetidamente para seleccionar el lenguaje deseado o apagar la función de reloj permanece desplegado en la pantalla LCD.
11 11 5.8 Reproducción de un programa 3. Operación del Radio 1. BOTONES DE ESTACIONES PREDEFINIDAS (1-6) Esto le permite ingresar el orden en que quiere reproducir un disco a) Para memo rizar la frecuencia actual, presionar y sostener por mas de dos DVD/VCD/CD.
Page 13
5.5 Reproducción en modo búsqueda 1. Durante la reproducción del disco VCD/CD, presione el botón INT en el control remoto y se exhibirá lo siguiente: Select Digest Type Select Digest Type Title Digest Track Digest Chapter Digest Disc Interval Title Interval Track Interval Chapter Interval Utilice los botones UP/DOWN para seleccionar y luego presione ENTER.
4. Operación del Disco 5.4 Reproducción repetida 4.1 Iniciando la Reproducción 5.4.1 Repetir una / repetir todo Presionar "POWER" para encender la unidad. 1. Durante la reproducción de un DVD, presione el botón REPEAT en el control Después de encender la unidad, esta busca el disco automáticamente remoto o el botón 2RPT en el panel frontal para seleccionar entre las siguientes e inicia la reproducción si hay un disco dentro del compartimiento.
4.2 Pausa 5. Operaciones avanzadas Durante la reproducción de un disco DVD/VCD/CD/MP3, presionando el botón 5.1 Reproducción con velocidad PLAY/PAUSE en el control remoto o en el panel frontal del DVD la reproducción se detendrá quedando la unidad en pausa, presione nuevamente para Presione el botón F.FWE/NEXT o F.BWD/PREV continuamente en el control cancelar y retornar al modo de reproducción.
4.5 Selección de capítulo/pista con los botones numéricos 1. Durante la reproducción de un disco VCD, presione el botón PBC en el control remoto para encender o apagar dicha función. Para discos VCD, presione PBC para encender o apagar esta función. A.
NX-661 Instruction Manual Fully Compatible To All Types Of Discs Such As DVD, VCD, S-VCD, MP4, MP3, WMA, CD. 2 IN 1 CAR AUDIO SYSTEM WITH DVD.VCD.CD.MP4.MP3.WMA DISC PLAYER AND AM/FM DIGITAL TUNING RADIO Remark: Any information subject to change without further notice...
Contents 7. Specification 1. Before Operation..................2 General Specification 1.1 Glossary....................2 Power Requirement.............DC 12V 1.2 Precautions and Maintenance..............2 Maximun Power output.......4 x 25W(mesured at DC 14.4 V) 1.3 Maintenance and Cleaning of Discs............3 Dimensions(w x h x d)..........178 x 50 x 165mm 1.4 Battery Information of Remote Controller..........3 1.5 Remote Controller Description..............4 DVD Deck Specification...
1. Before Operation 6. Trouble Shooting 1.1 Glossary PBC (playback control) It is a kind of signal(menu) recorded in the disc with SVCD or VCD2.0 Symptom Cause Solution format used for the playback control. For the discs contained PBC, It can playback interactive software with the menu displayed on TV.
1.3 Maintenance and Cleaning of Discs 5.17 Region Code Disc Maintenance 1. To keep the disc clean, andle the disc by its edge, do not touch the disc Q: Not begin to playback but to display REGION ERROR after inserting disc into surface of the play side.
1.5 Remote Controller Description 5.16 Parental Control 1. MODE BUTTON Q:After inserting DVD disc into disc compartment, it will appear a dialogue window 2. SEL BUTTON that ask me input a password of 4 digit. Why ? A:This is because that the disc movie you are playing was rated with the Parental 3.
1.6 Description of Face of Front Panel Disc Menu setting up Parental setting up Setting Disc Menu item is to Setting Parental item is to select a desired disc menu select a desired restrict grade language. For people s age. NOTE: If you want to change the grade, must input the password 137988.
1.7 Description of Unit Chassis Face RESET 1.LED indicator: Flashing when detachable panel is removed. 2.RESET button: Press it to rehabilitate the distorted program Brightness setting up Contrast setting up to zero. Setting Brightness item is to Setting Contrast item is to 3.
1.9 DESCRIPTION OF LCD ON THE FRONT PANEL B. Speaker Setup Page Downmix setting up Dual Mono setting up Setting Downmix item is for Setting Dual Mono item is for selecting LT/RT to activate selecting a desired channel. DOLBY Surround output or selecting single Stereo output.
1.10 Description of Input/Output Wires ANTENNA PLUG YELLOW WOOFER LINE OUT MEMORY B+ Fused TV Display setting up Mp3 MODE setting up YELLOW filter box BLACK(GND) 10A&1A Setting TV Display item is for Setting Mp3 MODE item can RED R fuses IGNITION SWITCH matching TV screen size.
1.11 INSTALLATION 4. In the state of MP3 disc playing, press the OSD button repeatedly on the remote controller to display: Filelist Repeat Off, Filelist Repeat On. 5. In the state of JPEG-CD disc playing, the OSD button is invalid. 5.15 System Setup Menu Operation 1.
5.11 Change Caption Language 2. Common Operation in Disc and Radio Mode In the state of DVD disc playing, press SUBTITLE button repeatedly to 1. POWER BUTTON select the language of the caption or turn off the caption.(depend on the Under power on mode, press POWER button shortly to turn off the unit but disc used.) the clock still display on LCD.
3. Radio Operation 5.8 Program Playback It allows you to enter the order in which you want some chapters/tracks in 1. PRESET STATION [ 1-6 ] BUTTONS DVD/VCD/CD disc to play. A]. To memorize the current frequency, press any one of the six preset buttons(1-6) on the front panel or on the remote controller hold for more 1 During playback, press PROGRAM button to enter a program interface as than 2 seconds.
5.5 Playback in Scan Mode 1. In the state of DVD/VCD disc playing, press the INT button on the remote controller to display an optional interface on the monitor: For DVD disc: For VCD disc: Select Digest Type Select Digest Type Title Digest Track Digest Chapter Digest...
4. Basic Disc Operation 5.4 Playback Repeatedly 5.4.1 ONE/ALL Repeat 4.1 Begin playback 1. Under mode of DVD disc playback: 1. Press POWER button to turn on the DVD player. Press the REPEAT button on the IR remote controller or the 2RPT button After turning on the DVD player, it will search for the disc automatically.
4.2 Pause Playback 5. Advanced Disc Operation In the state of DVD/VCD/CD/MP3 disc playing, press the PLAY /PAUSE button on IR remote controller or the front panel of DVD player to pause the playback, press the PLAY/PAUSE button again 5.1 Playback with Speed to resume normal playback.
4.5 Select Chapter/Track with Number Buttons 3.In the state of VCD disc playing, press PBC button to turn PBC on or off. In the state of VCD disc playing, press PBC button on the IR remote 1) When starting to turn on PBC function, it will play from the beginning of disc controller to turn PBC function ON/OFF: till it display PBC menu on TV screen if the disc include PBC menu.
Need help?
Do you have a question about the NX-661 and is the answer not in the manual?
Questions and answers