Canon LEGRIA HF R36 Instruction Manual page 191

The picture is displayed correctly but there is no sound from the built-in speaker.
- Speaker volume is turned off. Adjust the volume.
- If the HTC-100/S HDMI Cable or optional STV-250N Stereo Video Cable is connected to the
camcorder, disconnect it.
- The AV terminal is set to headphone output. Set
Memory Card and Accessories
Cannot insert the memory card.
- The memory card was not facing the correct direction. Turn the memory card over and insert
it.
Cannot record on the memory card.
- The memory card is full. Delete some recordings (A 60, 118) to free some space or replace
the memory card.
- Initialize the memory card (A 41) when you use it with the camcorder for the first time.
- The LOCK switch on the memory card is set to prevent accidental erasure. Change the posi-
tion of the LOCK switch.
- A compatible memory card must be used to be able to record movies on a memory card
(A 36).
- The folder and file numbers for MP4 movies and photos have reached their maximum value.
Set r>[File Numbering] to [Reset] and insert a new memory card.
Cannot upload files wirelessly using an Eye-Fi card.
q>
- [Eye-Fi Communication] is set to [Off] (... appears onscreen). Set it to [Auto-
matic].
- Wireless communication is not available with an Eye-Fi card in recording mode. Set the cam-
corder to playback mode.
- */)/( Wireless communication is not available with an Eye-Fi card when the
camcorder has established a wireless connection. Make sure the camcorder has ended the
connection.
- Opening the LCD panel may help when the wireless connection is not strong enough.
- During wireless transfer, wireless communication may stop when the wireless signal condi-
tions worsen (‰ appears onscreen). Perform wireless transfer in a place with good signal
conditions.
- Contact the card manufacturer's customer care.
r>
[AV/Headphones] to [AV].
Additional Information
191