Page of 2

GE JKP35BM Dimensions And Installation Information

27" built-in double wall oven.
Hide thumbs
   

Advertisement

JKP35BM/WM
GE
27" Built-In Double Wall Oven
®
Locate
junction box
for 24"models
Dimensions and Installation Information (in inches)
56" MIN. above
cutout floor
KW Rating
Allow 3/4"
240V
A
for overlap
6.8
over all edges
208V
5.1
of cutout
Breaker Size
240V
C
30 Amps
208V
30 Amps
B
Note: Cabinets installed adjacent to wall ovens
must have an adhesion spec of at least a 194°F
temperature rating. For 27" built-in single
ovens, if marks, blemishes or the cutout opening
G
is visible above the installed oven, it may be
necessary to add wood shims under the runners
and front trim until the marks or openings
are covered.
Conduit
(48-1/2" Long)
Note: Door handle protrudes 3" from door face.
F
Cabinets and drawers on adjacent 45° and 90°
21" MIN.
walls should be placed to avoid interference with
door opening
allowance
the handle.
Electric wall ovens are not approved for
installation with a plug and receptacle.
They must be hard wired in accordance with
Installation Information: Before installing, consult
installation instructions packed with product for
current dimensional data.
For answers to your Monogram,
GE Profile
®
GE
®
appliance questions, visit our website at
ge.com or call GE Answer Center
®
800.626.2000.
Suitable
bracing
to support
runners
Cabinet
A – Cabinet width required
21
B – Minimum cabinet depth
C – Opening width
D – Opening height
E – Recommended minimum cutout location from floor
Oven
F – Overall depth*
G – Overall height with trim
Overall height without trim
H – Overall width
*Depth including door handle is approximately 26-7/10" min. to 26-8/10" max.
or
service,
2" x 4" or
C L
equivalent
runners
18"
Over centerline
of cabinet
(must support 300 lbs.)
27"
27" min.
23-5/8"
25" min. - 25-1/4" max
50-1/8" max
13-1/4"
23-5/8"
51-7/8" - 52-3/4"
51"
26-5/8"
Locate
junction box
for 24"models
56" MIN. above
cutout floor
Locate
10
j unction box
for 27"models
A
either 5" MIN.
below cutout
floor or 44"
MIN. above
cutout floor
C
B
Access
from
adjacent
D
cabinet
required
E
Conduit
(48-1/2" Long)
2" X 4" or
equiv. runners
Minimum
(cutout floor)
cutout location
from floor
All GE ranges are equipped with
an Anti-Tip device. The installation
of this device is an important,
required step in the installation
of the range.
Specification Created 1/07
Allow 3/4"
for overlap
over all edges
of cutout
G
Cabinet
A – Cabinet w
21
B – Minimum
C – Opening
D – Opening
F
E – Recomm
21" MIN.
Oven
door opening
F – Overall d
allowance
G – Overall h
H – Overall w
*Depth includi
Listed by
Underwriters
Laboratories
320372
Suitab
bracin
to suppo
runne
Overall h

Advertisement

   Related Manuals for GE JKP35BM

   Summary of Contents for GE JKP35BM

  • Page 1: Installation Instructions

    For answers to your Monogram, GE Profile ® ™ ® appliance questions, visit our website at ge.com or call GE Answer Center service, ® 800.626.2000. 2" x 4" or equivalent runners Suitable...

  • Page 2

    System - Delivers even heat distribution and maximum oven control ™ • Interior Oven Light - Supplies light to make viewing the progress of cooking easy and convenient • Eight-Pass Bake Element - A powerful, continuous heating element loops throughout the oven, delivering evenly cooked foods •...

This manual also for:

Jkp35wm, Jkp35, Jkp35bmbb, Jkp35wmww

Comments to this Manuals

Symbols: 0
Latest comments: