Kyosho MINI-Z Racer MR-03N HM Type Instruction Sheet

Before beginning assembly, please read these instructions thoroughly.
For MINI-Z Racer MR-03N HM Type
ABARTH 500 Assetto Corse
Tools : Must be prepared.
1
Preparation of Chassis
Motor mounting position
High Mount Type (HM Type)
Front Body Mount
2 x 5mm TP
TP Screw
2
2
Windshield Wiper
Body
MZN120-T01
*Adhesive for plastic *Cutter Knife.
Assemble the chassis as shown below.
Replace the front body mount
with the one included in the set.
Painting should be done before assembling.
Window
White Body Set (Non Decoration)
*Nippers
Adjustment of Wheelbase / Front Tread
Wheelbase (M)
2x5mm
Chassis
For painting. use plastic model paints.
Side Body Mount (L)
THE FINEST RADIO CONTROL MODELS
INSTRUCTION SHEET
No.MZN120
+
*A Phillips Screwdriver
(Precision type or a small sized)
90mm
Narrow
Caution : Do not screw-in
excessively.
Front body mount.
Attach each part as required.
Side Body Mount (R)
R
+