Light Bulb Replacement; Cooktop Light; Night Light - GE Spacemaker 49-40612 Owner's Manual

Helpful Information

Light Bulb Replacement

Cooktop Light/

Night Light

Replace the burned-out
bulb with a 120 volt,
40-watt incandescent
bulb (WB36X10003),
available from your
GE supplier.
Oven Light
Replace the burned-out
bulb with a 120 volt,
40-watt incandescent
bulb (WB36X10003),
available from your
GE supplier.
38
1 To replace the bulb(s),
first disconnect the power
at the main fuse or circuit
breaker panel or pull
the plug.
2 Remove the screw at the
left of the light cover
and lower the cover.
Remove screw
1 To replace the oven light,
first disconnect the power
at the main fuse or circuit
breaker panel or pull
the plug.
2 To remove the top grille,
open the door and
remove the 3 screws on
top of the oven that hold
the grille into place. Slide
the grille to the left to
remove it.
Screws
3 Be sure the bulb(s) to be
replaced are cool before
removing. After breaking
the adhesive seal, remove
the bulb by gently
turning. Replace with the
same size and type bulb.
4 Replace the screw.
Connect electrical power
to the oven.
3 Lift the metal tab on the
light cover located above
the handle.
4 After breaking the
adhesive seal, remove
the bulb by gently
turning. Replace with
the same size and type
bulb.
Filter housing Light cover
5 Replace the light cover.
6 Replace the grille and
screws. Connect electrical
power to the oven.