Sharp EL-9650 Operation Manual page 18

System options
S
et to set communication
Transfer data between two EL-9650/9600c calculators using the communication cable (CE-450L).
CE-450L
EL-9650/9600c
Communication Procedure
Plug the cable into both calculators.
1
Turn power on.
2
Receiver
3
Pen
Touch
( or )
4
Pen
Touch
( or )
Sender
5
Pen
Touch
( or )
6
( or )
Pen
Touch
(Communication cable)
Communication cable
Specified LINK.
Select LINK/RECEIVE.
Specified LINK.
Select LINK/SEND.
CE-450L
7
Pen
Touch
8
Pen
Touch
9
List of the SEND menu
A SELECT ....................... Sends files individually as described below.
01 ALL ............................ Selects and displays all files.
02 List ............................. Selects and displays all list files.
03 Matrix ........................ Selects and displays all matrix files.
04 Graph Eqn .................. Selects and displays all graph equations.
05 Solver Eqn ................. Selects and displays all solver equations.
06 Program ..................... Selects and displays all program files.
07 G_Data ....................... Selects and displays all graph data files.
08 L_Data ....................... Selects and displays all list data files.
09 Picture ....................... Selects and displays all picture data files.
10 Slide .......................... Selects and displays all self-made slide shows.
11 A~Z, Ø ........................ Selects and displays all fixed memory of A to Z, and Ø
B BACKUP ...................... Menu to send all file data. Use this
EL-9650/9600c
Select SEND/ALL.
List of sendable data will
appear on screen.
Select 'LI', 'YI'
mark desired data to be
*
sent.
Execute Sending function.
feature to send the entire content.
]
]
16