Kyosho MINI-Z Racer MR-015 RM Type/ AWD MA-010 Type Instruction Sheet

Before beginning assembly, please read these instructions thoroughly.
MINI-Z Racer MR -015 RM Type / AWD MA -010 Type
NISSAN SKYLINE GT-R V-spec II Nür R34
Tools : Must be prepared.
1
Preparation of Chassis
Motor mounting position
Rear Mount Type (RM Type)
Front Body Mount
TP
2 x 5mm
2
Chassis
MZN73-T01
*Cutter Knife.
*Nippers
Assemble the chassis as shown below.
Replace the front body mount
with the one included in the set.
Caution : Do not screw-in excessively.
2x5mm
II
ür
*A Phillips Screwdriver (Precision type or a small sized)
Adjustment of Wheelbase
Receiver Antenna
Caution : Do not screw-in
excessively.
Front body mount.
Antenna Cord
INSTRUCTION SHEET
BODY SET
+ +
Wheelbase (L)
94mm
94mm
Bend the receiver antenna
as shown below.
2x6mm
2mm
30mm
R
THE FINEST RADIO CONTROL MODELS
No.MZN73
Receiver Antenna